Vintage & Antique Toy Parts

This key will fit the smaller Marx, Schuco, and other German, and Japanese toys. The inside opening is square, and fits on any toy with a square stem. Put one on your key chain to test toys before you buy them.

This is a large ramp and measures approx. 3 5/16"" wide By 7 3/4" long. The bent tabs are 1" center to center.

So look at pictures and YOU decide what shape the item is in. New in Box. Box has been ripped open as shown in pictures. Cans and case are in great shape. Sorry there is no paperwork. Display mounts to wall.

New made cast iron radiator shell for kelmet pressed steel truck. inboss like original not LEAD.

This key will fit the Large Marx toys. The key stem is 3/4" long. Add keys to your windup toys that are missing keys. Put one on your key chain to test toys before you buy them. These keys would be an asset for the toy collector.

Here are 7 original parts to the Champion 98 racer. There are 2 front wheels and tires, both tires need replaced as shown. There is one rear tire that is slightly out of round but still useable. There are 2 baseplate caps which show wear as shown.

This key will fit the smaller Marx, Schuco, and other German, and Japanese toys. The inside opening is square, and fits on any toy with a square stem. Put one on your key chain to test toys before you buy them.

Diamond Shape. 63" long point to point and 36" tall point to point. Check out the pictures. I am sorry about this but I need to do this. No personal checks.

Nice small cast alloy jeep steering wheel accessory for the Tootsietoy army and untility jeep toys that measure about 5" long. Nice reproduction casting. This will provide the prices of all available options that I currently use for this particular item.

Nice reproduction side racks and stickers for the Nylint Ford Sales & Service truck. Occasionally I am slightly delayed but not very often. This will provide the prices of all available options that I currently use for this particular item.

Nice replacement stamped steel roof for the large Buddy L toy trucks and trailers. Occasionally I am slightly delayed but not very often. This will provide the prices of all available options that I currently use for this particular item.

Cast metal replacement steering wheeltoy part. Occasionally I am slightly delayed but not very often. This will provide the prices of all available options that I currently use for this particular item.

THIS IS A LOT OF 20 ANTIQUE CAST IRON TOY PARTS. IN USED CONDITION, HAS BROKEN PARTS, MISSING PINS TO KEEP TOGETHER, SCRATCHES, MARKS, STAINS, RUST, DUST AND WEAR FROM TIME.SEE PICTURES FOR DETAILS.

The cardboard backgrounds were wet and they are stained and some broken. I also have the piano which is in the last pic. Inv 01L067.

Nice reproduction injection mold plastic windshield for use on the Mighty Tonka cabs. Occasionally I am slightly delayed but not very often. This will provide the prices of all available options that I currently use for this particular item.

The scale???. 1/10th actual size or 1" = 10". Very nice old rare kit.Kit# H-1922 -298 and is date d 19 63. Nice box art. It comes with instructions. HARD TO FIND. No personal checks.

This key will fit the smaller Marx, Schuco, and other German, and Japanese toys. The inside opening is square, and fits on any toy with a square stem. Put one on your key chain to test toys before you buy them.

This key will fit the smaller Marx, Schuco, and other German, and Japanese toys. The inside opening is square, and fits on any toy with a square stem. Put one on your key chain to test toys before you buy them.

I know little about these. You get all shown.

Two Motors With Wheels / Commodore Vanderbilt 265E And 262E Car Parts. O Gauge.

Nice steel laser cut custom boom extension assembly for use on the Doepke Unit crane construction toy. Comes with the pins and clips for installation. Occasionally I am slightly delayed but not very often.

Fit for 6s Lipo battery. This Extension Lead is for connecting the Lipo Balance Lead to your charger, making it much easier to connect because the balance lead on the lipo battery is much shorter than the charging lead.

Very nice stamped steel and nickel plated bumper for use on the Nylint Ford trucks from the 1960's that use the two piece grill and bumper. This is for the part shown only but I also sell the upper half separately and both together in separate listings as well.

New in Box. #3-0849. I don't know the scale. It is 22 1/2" long. Some of the plastic wrapping is coming off. Very nice old kit. I am sorry about this but I need to do this. No personal checks.

These axles make restoring Structo toys a breeze, as you do not have to worry about damaging paint as when you do the peening method on these toys. Photos number 4 shows the Structo truck that this set fits.

THIS IS A LOT OF 7 ANTIQUE CAST IRON TOY BANK PARTS. IN USED CONDITION, HAS BROKEN PARTS, MISSING PINS TO KEEP TOGETHER, SCRATCHES, MARKS, STAINS, RUST, DUST AND WEAR FROM TIME.SEE PICTURES FOR DETAILS.

This key will fit the smaller Marx, Schuco, and other German, and Japanese toys. The inside opening is square, and fits on any toy with a square stem. Put one on your key chain to test toys before you buy them.

Occasionally I am slightly delayed but not very often.

So look at pictures and YOU decide what shape the item is in. New in box. Comes with baby spoon, 2 boxes of products and a little teddy bear. I think it was a 1979 product. NOTE: If there is anything in boxes that are food it is outdated and not to eat.

They are very easy to install. Once the headlight hole has been opened up just slip the headlight assembly through the hole and put the slotted retainer on to the headlight stem and push forward. The chamfer at the back of the headlight stem will slightly spread the retainer, giving it the right amount of tension to hold it securely.

Nice stamped steel reproduction tailgate for the Ford Econoline toy trucks made by Nylint Toys. Comes with hinge wire for ease in installation. Occasionally I am slightly delayed but not very often.

SOME ARE IN GOOD CONDITION AND SOME ARE NOT. SOLD AS IS AS PICTURED, UNTESTED AND IN USED CONDITION.

Nice pair of plated side trim replacement toy parts for use on the small pressed steel toy cars by Marx. Used on the cars that went with the toy garages and gas pump sets that measure about 6" long.

Will also work on other applications and for reference measures just about 2" long and will fit into a 1/4" hole. Made of real vulcanized rubber and is nice and plyable. Occasionally I am slightly delayed but not very often.

Sold in pairs only. Occasionally I am slightly delayed but not very often. This will provide the prices of all available options that I currently use for this particular item.

I don't know the scale???. It is 9 1/4" high and 13 1/4" wide. Kit #315. This is a sealed kit. No personal checks.

New in bags.  Rasin Bran, Apple Jacks, Corn Pops and Frosted Mini Wheats.   Please email me if you have any questions.  Buyer to pay all shipping charges.  International shipping will be higher than the USA.  International buyer's can only pay by paypal  We accept paypal, No personal checks. 

So look at pictures and YOU decide what shape the item is in. This is a 1/25 scale. This is a sealed kit. Check out pictures. No personal checks.

Sticker size is 6 1/2" tall x 5" wide. No personal checks.

In fair condition. Has wear due to age, use, and storage and needs cleaning and maintenance to work properly. This set has not been tested and may have broken or missing pieces. Perfect for any Collector or Fan.

Electricar KOKOMO Instruction Book - 14 pages - color & B&W - 8 1/2" x 11" - Quality reproduction - See samples pages below.

I don't know the scale???. This is a sealed kit. No personal checks.

Neat cast aluminum/zinc alloy replacement hood/fender siren for a Tonka toy fire or emergency truck. Sized as pictured and a good clean casting with nice detail. Pictures makes the aluminum appear somewhat polished but these are a raw casting with no finishing done.

Steelcraft sticker label 2" long

You are purchasing one of the grills/bumpers shown in the above picture. They are for the Nylint Chevy style trucks from the 1970's.  This is the later style that gets riveted to the chassis.  Will also fit the earlier style with the clips but you'll need to drill two 1/8" diameter holes into the chassis for the rivets to go through.  Right now only have them in black plastic as these are pre-production samples but in the near future will have them chrome plated as well. Please use ruler in picture for sizing information. Nice injection mold part with excellent detail quality.