Hobby RC Model Vehicle Parts & Accessories

If the screws are pictured, they are included. Even Similar orders can vary. PRODUCT LINES.

One TBR Rear Left A-Skid - L136. One TBR Rear Right A-Skid - L137. Two TBR Rear Backer Plates - Y162.

Traxxas TQI 2.4Ghz 2Ch TRANSMITTER. TQi Transmitter Features This Transmitter will work with the following receivers: 2218(x), 6518 or 6519 Receiver. No Module or Receiver is included. High Output signal for maximum range.

3.6mm Lens1000TVL FPV Camera 3.6mm Wide Angle Lens CMOS NTSC PAL for QAV250 MulticopterThis camera keeps 1000TVL resolution and excellent color rendition, supporting 4.5 to 6V operating voltage. The board size is reduced to 25*17.5mm, which can reduce air resistance for FPV aircraft. It is suitable for fixed-wing aircraft and Multirotor like QAV250, which are highly required in voltage and weight.Format: NTSC PAL with one key to switchSensor: CMOSColour: Blackmaterial: metalLens: 3.6mmPower Supply: DC 4.5-6VDefinition: 1000TV LinesView angle: 120degreeSensitive area: 1/2.7 inchSize: 25 x 17.5 x 30mmWeight: 9.5gPackage Including1 * 1000TVL HD CMOS Camera 1 * Cable 1 * ManualNote: Light shooting and different displays may cause the color of the item in the pict.

2085 Digital Waterproof High-Torque Ball Bearing Servo. Torque: 365oz-in.

Color: Black Red; High-quality tinned copper inner core, can maintained copper wire for a long time does not oxidize.Silicone outer skin, soft wear-resistant, high temperature resistant, smooth surface.Material: Conductor - tinned copper; Insulator: Silicone; Wire number: 12AWGTotal length: 3meter / 10feet（Each Wire 1.5meter)Number of shares / diameter: 680 / 0.08mm; Wire diameter: 2.41mm; Sheath outer diameter: 4.5mm; Insulation Thickness: 3.42mmConductor resistance: 9.8 ohm / one thousand metersRated voltage: 600VTest Voltage: 2000VTemperature range: -60 ℃ ~ 200 ℃Outer diameter tolerance: 0.1mmScope: Applicable to all kinds of electrical and electronic, industrial electronics, model aircraft, Cars, ship model, batteries, motors and other links insul.

2065 Waterproof Sub-Micro Servo. Height:0.89 in (22.5 mm).

TSM TQI 5ch RECEIVER (TRA6533). Traxxas is changing the sticker on the receiver. TSM can be turned off or adjusted from the TQi Transmitter. Traxxas TQi transmitters with Multi-Function knob. Traxxas Link Wireless Module may also be required depending on TQi.

Eleminate the slipper assembly on the Slipper Clutch Eliminator for 1/10 Traxxas Jato 2.5 / 3.3 Transmissions. Simple to install, use your existing cross pin, bearing, spring, nut and spur gear to complete.

Model: N5065 320KV. Shaft size:Dia.8 x 20mm. Internal resistance: 20mOhm. The motor length: 78mm. 1 x Motor fittings. Lipo: 3S-8S (11.1V-29.6V).

If the screws are pictured, they are included.

1 Mavic Air CLONE DRONE. Don't throw it into fire. Don't throw it into water. 1 User Manual. 1 Screwdriver. 2 Propeller Protector. 2 Spare Propeller. 1 3.7V 1000mAh Lipo Battery.

If the screws are pictured, they are included.

STX2 2 Channel 2.4 GHz Radio. SRX200 2-channel micro receiver. Built-in 3 position throttle limiter. If the screws are pictured, they are included. PRODUCT LINES. Even Similar orders can vary.

The Fronts are a perfect fit on 1/16 Summit & E-revo. The Rears are only a perfect fit on 1/16 Summit. (extends wheelbase by 10mm). Includes: Front Arms (TRA7131) & Rear Arms (TRA7132r). If the screws are pictured, they are included.

If the screws are pictured, they are included.

2075 Waterproof Digital Ball Bearing Servo.

If the screws are pictured, they are included.

TRA6888X Drive Hub. TRA5117 Bearing (2) 6x12x4mm. TRA5120 Bearing 12x18x4mm. If the screws are pictured, they are included. Even Similar orders can vary. PRODUCT LINES.

NEW TRAXXAS SLASH 2wd COMPLETE CHASSIS KIT. GREAT FOR BUILDING OR FOR SPARE PARTS. Most issues are easily fixed, we are only human errors do occur. We are here to help with any concerns; give us a chance to make it right if there was an error.

Color: Black red Cable length: about 150mm respectively 10 Pair x Male Female connector Brand Unbranded MPN Does not apply UPC 4894462259665 EAN Does not apply EAN Does not apply.

Front and rear sway bar set for the Traxxas Slash 4x4, Slash 4x4 LCG, and 1/10 Rally vehicles. - Requires Traxxas 3932 for mounting the wire. - Adjustable spring steel sway bar wire. - (3) sets of front and rear sway bars wire.

This is a DJI Phantom 3 OFDM Receiver Module (Part 35). Includes everything pictured. This ofdm module comes complete with backing plate cooling fan and four of the antennas as pictured. This has been tested prior to removal and functions normally. This is a direct replacement for, and only compatible with, the Phantom 3 Advanced or Phantom 3 Professional. This is not a suitable replacement for, and does not accommodate, the Phantom 2 series, Phantom 3 Standard. Please read the description carefully and look at all the pictures. All of our items ship exactly as pictured and described. This is a genuine DJI part removed from a new DJI Phantom 3 that has never been flown, but may show marks from handling and disassembly. Item ships as pictured without manufacturer’s retail packaging.

New Traxxas Rustler XL-5 Red Body with Decal Sheet. Also fits VXL models. We are here to help with any concerns with your order.

TRA3956 Spur 54t (0.8m pitch, compatible with 32-p). Assembled Spur / Slipper Assembly TRA5351 Slipper pressure plate and hub. Perfect fit on these Traxxas 4x4 Models Ruster 4x4. Stampede 4x4. Rally VXL 4x4.

Screws removed from a new Revo RTR kit, excepting those left with assemblies. If the screws are pictured, they are included. Tools and shock oil are also included.

Assembled 43t Straight tooth main Differential, 13t Main Input Gear & Gearbox Case. 2018 Version with updated bulkhead webbing! If the screws are pictured, they are included. Even Similar orders can vary.

STX2 2 Channel 2.4 GHz Radio. SRX200 2-channel micro receiver. Built-in 3 position throttle limiter. If the screws are pictured, they are included. PRODUCT LINES. Even Similar orders can vary.

If the screws are pictured, they are included. Even Similar orders can vary.

These are the updated 2019 Kraton Hubs which use the O-rings with the hub nuts! Also includes bearings as pictured! If the screws are pictured, they are included. Even Similar orders can vary.

TRAXXAS TRX-4 SCALE WORKING DASHBOARD W/ LED VENTS. WORKING DASHBOARD, WORKING AIR VENTS, LED LIGHTS W/ TURN SIGNALS. REAL WORKING FAN TO BLOW AIR THROUGH VENTS. Dashboard led light. Simulation AC vent can pump air out.

Convert your traxxas ESC to use your deans batteries or deans battery over to a traxxas connector.

May show markings from removal. Perfect fit on many Arrma models. Check your manual for these part numbers: AR310484 AR310449 AR713009. Even Similar orders can vary. If the screws are pictured, they are included.

1/5 Scale King Motor, Rovan, HPI 2WD Buggy. 1/5 Scale King Motor, Rovan, HPI 2WD Truck. King Motor Baja CNC Aluminum Rear Wheel 24mm Hex Hubs (set of 2). Amazing value for your money with the support you need.

Pitch: 1 Mod. Number of Teeth: 50. Thickness: 8mm.

CenterDiff Gear Set 46T. If the screws are pictured, they are included. Even Similar orders can vary. PRODUCT LINES.

Direct fit in 2016-2018 models. ARA320469: SLIDING MOTOR MOUNT PLATE (RED). ARA320468: SLIDING MOTOR MOUNT (RED). ARA320499: CENTER DIFF MOUNT. If the screws are pictured, they are included. AND GREAT SERVICE.

This body is made from the original Bolink mold. It is not a reproduction. It is a 12th Scale body. Rear Width = 6 3/4" ( 171.4mm). Front Width = 6 5/8" ( 168.2mm ).

Slipper Clutch Eliminator aluminum Bearing Adapter&0.8M 32P Hardened Steel 54T Spur GearTraxxas Slash 4x4. eleminate the slipper assembly on the Traxxas 1/10 Stampede / Slash 4x4 VXL Transmissions. Simple to install, use your existing cross pin,, spring, nut to complete.

(5)SAMIX word etched. 1) 4pcs brass shock under retainers add bottom weight to 25g, weight in bottom can improve climb performance. 2) Not slotted design like std plastics cap, especially when you use soft spring the spring cap will not fall out.

New cen racing genesis nemesis gst gsr1/8 shocks! great for many other 1/8 buggy’s truggy crawlers and other cars! Great deal don’t miss out! Total length is Aprox 6 inches 1/4 center mounting hole to hole 5 inches 3/4! Price is for 4 shocks!

Up for sale is a great addition for your scale RC truck or rock crawler. You will receive Driver #1 - "Lou". Lou has around 20 points of articulation throughout his entire body. As an example, he fits great inside an Axial Wraith.