|
mini Drill NEW Mini ROTARY Professional Drill GRINDER
DRILL, GRIND, POLISH, ENGRAVE. TABLE BENCH set Mobel# TM-1A
| Voltage: | 230V/50HZ | | Phase: | Single | | Input Power: | 120W | | Variable Speed Control: | 0-10000RPM | | Flexible Shaft Collect: | 3.2mm | | Flexible Shaft Length: | 108cm | | Grinding Wheel Size: | 75mm x 20mm | | Grinding Wheel Arbor Hole: | 10mm | | Qty/Ctn: | 4pcs | | Ctn Size: | 67x33x22cm | | G.W.: | 16kgs | | N.W.: | 15kgs |

If there is one tool that can do nearly everything, it's the rotary tool. This multi-tasking tool should be one of your first investments for the wide variety of tasks it can perform. Here are just a few of the things you can do with a rotary tool and accessories.(And there are probably a hundred more things I don't have room to list) Just see pictures below.
-
PERFECT FOR WORKING WITH ALL TYPE OF MATERIALS.
-
Perfect for DRILLING
-
Perfect for ENGRAVER
-
Perfect for POLISHING
-
Perfect for GRINDING
-
-
-
-
-
8,000 to 30,000 RPM (with variable speed selector)
includes flexi shaft 217+ pcs accessories kit box with accessory compartment
-
Use for PC Modding, Grinding, Cutting, Sharpening, Sanding, Polishing, Drilling & many more.. Applicable to any type of materials Glass, Wood, Plastic, Ceramic, Metals & many other materials.
-
Large Accessories Set: Flex-shaft Attachment, Thread Tip Mandrel, Screw Mandrel, High-Speed Cutters, Wire Brushes, Bristle Brushes, Sanding Accessories, Polishing Accessories and more..
-
USE FULL IN EVERY WAY
Does all the job :
 |
Let's start out with the carbide or high speed steel burr. I use these to "whittle" the basic shape of the handle, especially in smaller areas where my belt sander won't reach. You can use these to shape the brass or nickel silver guards also. Use a light skimming motion--these are aggressive and will dig in if you use any pressure. Especially the carbide ones. I call it "whittling". |
 |
You can also use the carbide rasps to enlarge pin holes or the slot in a guard. ( For guard slots though, use a file to finish up to get a good, flat side). The carbide rasps are strong enough to shape hardened steel, but go slow. |
 |
Small as they are, the sanding drums can be used to finish shaping the handle. (Actually though, I always recommend hand sanding as your final step). I typically use a lower speed--these go so fast they can burn the wood. They wear out fast but fortunately they are economical and easy to replace. |
 |
Cutting disks, in addition to cutting bar or rod stock are also useful for roughing up the shiny metal surface of the tang, to give the glue something more to bite into. I like the slightly larger fiberglass reinforced ones--they hold up a lot longer and aren't as brittle. |
 |
These cutting disks can also be used to profile a blade blank, getting it to the right shape before going to the grinder. It's a slow process and you'll eat up a few disks, but it's sure a lot easier than using a hacksaw. In this photo I'm modifying the tip of a tanto blade I was working on. |
 |
Great Job for drilling any holes on any item you want.. |
|
| |
Great for buffing, Sanding anything rusty, or just removing any stains, or any dirty build ups on your valuable items.. |
 |
Grind / Cuts anything you need too, useful for fine work or for all hobbist... For ordinary trimming, polishing & grinding. |
 |
Although it won't replace the buffing wheel on your grinder, those little buffing wheels are great for polishing small areas or items. |
*****************************************************
Add +) Shipping: Metro-Mla P160 / Las Pinas, Antipolo, Rizal P180 Provincial Visayas 340 / Luzon 580
Option 1> DROP BY my place 4th Ave (west), Kalookan city. ym:geoffreydt so u can get my full address
Option 2> GCASH > 0917-513-5566
Option 3> BANKS : Metro Bank, BPI, BDO sms me for details choose which you like
Option 4> u can use Paypal using my email: geoffreydt@yahoo.com
******************************************
After sent payment text me your full details,Qty, item name,price & address @Contact: Jeff, GLOBE: 0917 513-5566 ym: geoffreydt or 586-0416 so I could prioritized your order for shipout. |